Содержание: Home / Production / technical information

Stretch ceilings possess unique characteristics and operational opportunities which allow to use widely them at repair and construction office and premises.
Physical and technical characteristics of stretch ceilings
  • The durable, high-quality materials made of polyvinyl chloride (PVC)
  • It is accessible more than 100 colors and structures of stretch ceilings, including matte, satiny, glossy, velvet, a metallic, translucent and punched
  • Stretch ceilings have small weight
  • Stretch ceilings do not give in to corrosion
  • Stretch ceilings water-proof and air-tight
  • Stretch ceilings not inflammable and nonpoisonous
Owing to materials of which they consist, stretch ceilings have some specific properties which are their advantages. For example, at you the roof has leaked or you were flooded with neighbours to you it is not necessary to be afraid of it as the stretch ceiling maintains up to 100 litres of water on 1 square meter of the surface.
After removal of water the ceiling restores the initial tension. For removal of the accumulated water it is necessary to open apertures for fixtures. If the built in fixtures is not available, it is necessary will address for the help to experts of firm who made installation of your ceiling.
Stretch ceilings are characterized by following properties:
  • · do not change the properties at temperature drops of air from -5 With up to 50 With
  • · maintain pressure upon a surface of a film up to 100 kg on square meter
  • · a surface does not burst, and is not afraid of impacts
  • · to wash a surface of a stretch ceiling easily
  • · are ecologically pure product
  • · stretch ceilings do not support burning, are completely fireproof
  • · the weight of a vinyl film makes 230 gram on square meter
  • · thickness of a film makes 0,17 millimeters
Scope of a stretch ceiling very much greater. Ceilings are established in premises of any form, thus they are established under any corners and even in different planes. Probably to do smooth and sharp transitions of one plane in another.
The warranty period established by our company on reliability of seams and designs, invariance physical and characteristics of a cloth, quality of welded seams of stretch ceilings - 15 years.
Look in a photo catalogue of a photo of stretch ceilings and designs!
Installation of stretch ceilings at repair and construction
Installation of stretch ceilings is simple for assemblers and is made quickly. Stretch ceilings have three basic elements: a film, a profile of PVC, a harpoon and a rigid profile from PVC or the aluminium, established on perimeter of a premise.
The profile is established on perimeter of a premise on flat or curvilinear surfaces. There is no need for additional internal systems of fastening. Profiles can be various design, except for it installation of a ceiling when profiles are completely latent is possible.
Installation of stretch ceilings in a typical room or small office borrows from two till four o'clock, depending on complexity of a premise. The quantity of corners and a configuration of a premise defines complexity of installation, and it, in turn, defines actual quantity of demanded time.
The stretch ceiling can be temporarily removed, at repeated installation the flexible surface of a ceiling completely comes back to the initial form. Tension ceilings do not demand painting and service.
The scheme of installation of stretch ceilings
  • On perimeter of a premise we establish a profile. We define, where fixtures will settle down, and we do for them fixture on the basic ceiling.
  • We develop a cloth
  • We fix corners
  • Then we heat up a cloth by means of a thermal gun. The film becomes elastic, it pull and fix in a profile special palette knife
  • Cooling down, the cloth accepts the final form
  • Accurately we grope through a cloth fixture for fixtures, we paste a ring from PVC and the circle of a film is cut out inside. Fixtures can be established
Manufacture and technological features of installation of stretch ceilings
Welding of cloths and other special operations on preparation of the complete set under installation on object are made on own manufacture in Moscow, equipped by the modern equipment for welding materials of PVC by method r f current (the material heats up from within a current of high frequency and welding occurs at a molecular level, than full tightness of the welded cloths is reached). The welded seams made on such technology on a cloth practically are not visible.
The mirror cloth is established on special technology with application of PVC of the profile having a special clip, the technology is patented by our French partners.
These complexities are caused by that the mirror cloth does not weld among themselves and it is impossible to weld a harpoon that is why installation of cloths with accurate seams is possible only at use of this special structure on it. The others of a film are established on traditional harpoon technologies, nothing differing from technology of the founder of stretch ceilings of firm «Barrisol».